Installation Requirements

This guide will walk you through the requirements for supporting the Onboard's Edge software on your building's IP network.

🗄️ Virtualization Requirements

The Onboard Edge Node supports the following x86-based virtualization platforms:

• VMware
  
  • ESXi 7.0 U2 (7.0.2) or later
  • Fusion 12.2.x or later
  • Workstation PRO/Player 16.2.x or later

Not Officially Supported (Untested)

These hypervisors have not been validated. They may work but are not currently supported without additional packaging or testing:

• VirtualBox
• Proxmox
• Microsoft Hyper-V

CPU Architecture

• Supports X86_64
• Edge Node does not support ARM

🖥️ Hardware Requirements

This is the machine where Onboard’s Edge Software will run. It is typically managed by your building’s IT/OT department. If not, you can use an external device like a mini PC, or even a raspberry-pi.

Minimum Hardware Requirements‍

These are the minimum specs required to run Onboard’s Edge Software reliably:Minimum system requirements:

• 10 GB Storage 
• 2 GB RAM 
• 1 CPU Core
• Ethernet port required if using external hardware 

Recommended Devices

Here are the recommended specifications to ensure smooth performance and compatibility.

• Intel NUC Kit
• ASUS NUC 14 Essential
• Dell OptiPlex 3070 Micro
• Lenovo ThinkCentre M900 Tiny Desktop
• HP EliteDesk 800 G4 Mini
• GEEKOM Mini PC

💬 Need help verifying if your hardware is compatible? Ask us in the Online Community

⚠️ Important:

• Ensure BIOS is configured for “Always On” mode so the device powers on automatically after outages.
• Physically label or sticker the device: “Do Not Unplug” to avoid accidental downtime.